At AFBEST, we believe that healthy living should be effortless. Our wellness-focused juicers are engineered to deliver maximum nutrition, high juice yield, and fresh results, bringing the ultimate "Cold Kitchen" experience straight to your countertop.
But as any juicing enthusiast knows, the secret to the perfect glass of fresh juice lies in keeping your machine spotless. A clean juicer ensures the purest flavor, prevents fiber buildup, and extends the lifespan of your appliance.
To help you maintain your machine, we’ve put together a quick, hassle-free disassembly guide. Watch our 28-second walkthrough video below, follow our step-by-step instructions, and check out the master reference table to prep your juicer for an instant deep clean!
📺 Watch the Short Video Guide
🛠️ Step-by-Step Disassembly Instructions
Before you begin, ensure your juicer is turned off and unplugged from the power source.
-
Step 1: Turn Off the Faucet – Lift the metal spout on the juice outlet to close it. This prevents any leftover juice from dripping onto your countertop.
-
Step 2: Remove the Feed Chute – Twist the large, transparent top feed chute clockwise (following the unlock icon) and pull it straight up to remove it.
-
Step 3: Separate the Juicer Body – Rotate the main juicer chamber assembly to unlock it from the motor base, then lift it away.
-
Step 4: Release the Auger & Filter – Locate the bright orange Auger Lock on the side of the juicer body. Press and hold the lock to the right, then pull the internal auger and filter assembly upward out of the chamber.
-
Step 5: Separate the Auger and Filters – Pull the black juicing auger out from the filters, then dismantle Juice Filter A and Juice Filter B.
-
Step 6: Remove the Pulp Outlet Plug – Flip the juicer chamber over and pull out the black silicone pulp outlet plug at the bottom for an unhindered rinse.
💡 Quick Reassembly & Care Tips
-
The Golden Rule: Always rinse your dismantled parts under warm running water immediately after you finish juicing. Once fruit sugars and fibers dry up, they become much harder to remove!
-
Effortless Reassembly: Putting your AFBEST juicer back together is just as simple. Just reverse the steps: snap the silicone pulp plug back in place, nest Filter A into Filter B, slide them onto the Auger, and hold the orange lock to the right while pushing the core assembly smoothly back into the chamber.
With a design this streamlined, you can spend less time scrubbing and more time enjoying fresh, nutrient-rich, wellness-boosting juices.
🛒 Ready to Upgrade Your Kitchen?
Experience the pure results of the AFBEST Cold Press Juicer. Check out our official listing on Amazon to view full specifications, customer reviews, and limited-time promotional offers!
0 comments